Second, if the first door and floor
Install door and must be confirmed floor, dampproof mat and the concrete thickness of the buckle, in order to keep the right size, in order to prevent the floor installation does not.
In addition, the first outfit can avoid secondary floor workers door the door that the door handle and play crural line linking problem, on the protection of the late response to the floor, so as not to cause unnecessary when installing the floor face scraping wear phenomenon.
Why put first floor door advice?
If the first door, usually set aside the thickness of the floor clearance, if the clearance adjustment is not good, easy to cause the door wouldn't open. Thus workers need to install the second door adjustment. When installing door first floor, can adjust the clearance. Besides, Windows and doors production cycle is long, the floor of the arrival of the goods and the shop installs is relatively much faster, first floor can save the time limit for a project.
Why the advice of the flooring install door first?
First of all, only after the installation, the door in the floor the line that play a base will be tight when the card at the edge of the door cover line, then make the plug gap.
If not install door first, crural line in the position of the door cover line interface will need to set aside more, in the late outfit door, door teacher will tear down the foot line, after installing the door cover line is not on the foot line for processing, it can also cause the floor master twice the door handle.
In addition, because the ground is not completely flat, generally easy to appear not too smooth phenomenon at the door, if you don't install the door, floor met the door slightly rough, don't appear on the feeling of peace.
Then, actually first floor or install door?
What you row, in fact, is not the problem, the key is to do a good job of the coordination of connection part, main is to coordinate a good door and shop floor worker, good has been shipped just part of the finished product protection, for the family that decorate, avoid unnecessary loss and trouble is at the top of the results.
Install door first, want to know the thickness of the floor, when installation should pay attention to reserve enough space; First floor, under the condition of the foot line and door cover junction workers need to install the door handle; In addition, the door is not smooth, when doing the door line will be hard to press some floor.
If conditions permit, to install the door first, and then put the floor, then install door. But general door teacher didn't want to run two times, you may first floor simple point.